General Data
These LED rear flashers are suitable for securing the incident scene if the boot lid has been opened and as a result the special signalling system is concealed. They are fitted in the front end of the boot lid. Theft or destruction through vandalism is thus prevented, since it is only during operations at the incident scene that the flashers are accessible from the outside.
They can also be mounted on the rear of the vehicle in order to support the special signalling system.
Through appropriate connecting the flash mode can be switched to "synchronous" or "alternating".
The housing is made of breakproof and heat-resistant plastic.
K-LR 6 | K-LR 7 | K-LR 8 | |
Operating voltage: | 12V DC | 24V DC | 12/24V DC |
Power consumption: | < 0.8A | < 0.5A | 0.5A(12V) ... 0.3A(24V) |
Flash frequency: | 2.1Hz | 2.1Hz | 2.1Hz |
Weight: | 250g / set | 250g / set | 250g / set |
Dimensions (mm): | 44 x 111 x 28 | 44 x 111 x 28 | 44 x 111 x 58 |
Number of LEDs: | 63 / pieces | 63 / pieces | 3 / pieces |
Licenses: | K-260, | K-260, | K-320, e1-023101 |
Ordering Name
Order number | Ordering name |
5014 8404 000 | K-LR 6; LED flasher 12V (1 set) |
5014 8414 000 | K-LR 7; LED flasher 24V (1 set) |
5014 8418 008 | K-LR 8; LED flasher 12/24V (1 set) |
Selling Agencies
Our expert staff are pleased to be at your disposal for further questions and concerns. [ ... mehr ]
Download
You will find other material relating to our products in our download section.
There documents such as data sheets and operating instructions are provided for your use.[ ... mehr ]
top