Owing to the progress in LED technology, the use of this light source in flashing beacons is increasingly important for securing vehicles of the police, fire brigade and emergency medical services.
The LED front flasher is designed to be mounted in or on the radiator grille or bumper of the vehicle and provides additional warning to the preceding traffic in built-up areas.
The high-performance front flasher is designed to be fitted in the TOPas lightbar and warns the preceding traffic. When used outside built-up areas, the LED flashers are visible from a large distance. They are noticed earlier than the actual beacons.
These LED rear flashers are suitable for securing the incident scene if the boot lid has been opened and as a result the special signalling system is concealed. They are fitted in the front end of the boot lid.
In order to warn the preceding traffic on the way to the incident scene, this LED flasher can be attached to the windscreen of the emergency vehicle. Attaching is done either with a self-adhesive seal strip (LWS 12 B) or through suction by means of a vacuum pump located inside the flasher (LWS 12 BV).
This LED flash module was developed for retrofitting in the TOPas lightbar and increases approx. 5-fold the light radiation in the direction of the beam.
Selling Agencies
Our expert staff are pleased to be at your disposal for further questions and concerns. [ ... mehr ]
Sales Partners
If you are looking for a contact person outside Germany, our foreign sales partners can certainly help you. [ ... mehr ]
top